Are you seeing the “Hardware Problems Were Detected” error while running the Windows Memory Diagnostic tool? You’re not alone. This issue is commonly reported in Windows 10 and Windows 11 and is often linked to underlying hardware malfunctions.
🔹 What Causes This Error?
- Faulty RAM modules
- Corrupt system files
- Overheating or hardware failure
- Issues with the motherboard
🛠 How to Fix It:
✔️ Run Memory Diagnostics in Safe Mode
✔️ Use Windows System File Checker (SFC)
✔️ Check for Overheating Issues
✔️ Physically inspect and re-seat RAM
✔️ Replace faulty RAM if needed
📌 Follow our full guide to troubleshoot and fix this error! Stay tuned for more tech solutions. 🚀
What Causes the “Hardware Problems Were Detected” Error in Windows Memory Diagnostic?
If you’re encountering the “Hardware Problems Were Detected” error in Windows Memory Diagnostic, several factors could be responsible. Here are the most common causes:
🔹 Incompatible or Faulty Drivers – A partially incompatible driver may force a non-essential hardware component to malfunction.
🔹 Overclocking Issues – Tweaking your CPU, RAM, or GPU voltages/frequencies can trigger overheating warnings in Windows Memory Diagnostic.
🔹 Corrupt System Files – Memory management errors often arise due to corrupted Windows files.
🔹 Faulty RAM – If you see a “Physical Address Limit Exceeded” message, a RAM stick may have failed and needs replacement.
🔹 Other Hardware Failures – The error can also stem from a failing motherboard or power supply issues.
⚙️ How to Fix It?
✔️ Update your drivers
✔️ Disable overclocking
✔️ Run system file repair commands (SFC & DISM)
✔️ Physically check RAM sticks
✔️ Replace damaged hardware
💡 Need step-by-step troubleshooting? Follow our full guide for expert solutions! 🚀
Method 1: Boot Your Computer in Safe Mode
If you’re seeing the “Hardware Problems Were Detected” error, a faulty driver might be the culprit. To check if this is the case, boot your PC into Safe Mode and see if the error persists.
Steps to Boot into Safe Mode:
1️⃣ Reboot your computer and immediately hold the F8 key (or Fn + F8 on some laptops) to enter the Windows Recovery Environment (WinRE).
💡 Tip: If this doesn’t work, turn your PC on and off 3 times to trigger automatic repair mode.
2️⃣ Navigate through:
See Advanced Repair Options → Troubleshoot → Advanced Options → Startup Settings → Restart
3️⃣ After restarting, press F5 to select Safe Mode with Networking.
What to Do in Safe Mode?
✔️ If the error disappears, your drivers are likely causing the issue. Update or reinstall them.
✔️ Run a malware scan using Windows Defender to check for security threats.
🔧 Next Step? If Safe Mode works fine, follow our guide to update drivers, run SFC/DISM scans, and fix corrupted system files! 🚀
Method 2: Use the Hardware and Devices Troubleshooter
Windows 10 and Windows 11 include a built-in Hardware and Devices Troubleshooter to detect and fix hardware-related issues. Running this tool may resolve the “Hardware Problems Were Detected” error.
Steps to Run the Hardware and Devices Troubleshooter:
- 1️⃣ Open the Search Bar by clicking the magnifying glass icon or pressing Windows + S.
- 2️⃣ Type Control Panel and select it from the search results.
- 3️⃣ In the top-right search bar, type Troubleshoot and click on Troubleshooting.
- 4️⃣ Click on View all in the left panel to see all available troubleshooters.
- 5️⃣ Scroll down and locate Hardware and Devices → Click on it to open the troubleshooter.
- 6️⃣ Click Next to start the scan. Windows will analyze the issue and attempt to fix it automatically.
✅ If a problem is found, follow the on-screen instructions to resolve it.
🔄 After troubleshooting, restart your PC and check if the error persists.
Method 3: Stop Overclocking Your PC
Overclocking your CPU, GPU, or RAM can cause instability and trigger the “Hardware Problems Were Detected” error. If you have previously adjusted your system’s clock speeds, resetting them to default may resolve the issue.
How to Disable Overclocking:
- 1️⃣ Restart your PC and enter the BIOS/UEFI by pressing F2, F10, DEL, or ESC (varies by manufacturer).
- 2️⃣ Navigate to the Overclocking or Advanced Performance settings.
- 3️⃣ Look for options related to CPU, GPU, or RAM Overclocking and set them back to Default or Auto.
- 4️⃣ Save the changes and exit the BIOS.
- 5️⃣ Restart your computer and check if the error persists.
✅ If the issue disappears, overclocking was likely the cause. To avoid future problems, keep your hardware at manufacturer-recommended clock speeds.
Method 4: Use MemTest86 to Check Your RAM
If you’re seeing the “Physical Address Limit Exceeded” error, your RAM may be failing. To confirm this, you can use MemTest86, a reliable tool for diagnosing memory issues.
Steps to Test Your RAM Using MemTest86:
- 1️⃣ Download MemTest86 from the official website and create a bootable USB drive.
- 2️⃣ Restart your computer and boot from the USB drive by selecting it in the BIOS/UEFI boot menu.
- 3️⃣ MemTest86 will automatically begin scanning your RAM for errors. Let the test run for several passes to ensure accuracy.
- 4️⃣ If MemTest86 detects errors, it’s a strong indication that your RAM is failing and needs to be replaced.
- 5️⃣ If you have multiple RAM sticks, test each one separately to identify the faulty module.
✅ Solution: If the test confirms RAM failure, replace the faulty stick with a new one to prevent further system instability.
Method 5. Repair or Reinstall Windows
If the “Hardware Problems Were Detected” system file corruption causes a message, you should be able to fix it by repairing or reinstalling Windows.
One more thing
If you’re in search of a software company that embodies integrity and upholds honest business practices, your quest ends here at Ecomkeys.com. As a Microsoft Certified Partner, we prioritize the trust and satisfaction of our customers. Our commitment to delivering reliable software products is unwavering, and our dedication to your experience extends far beyond the point of sale. At Ecomkeys.com, we provide a comprehensive 360-degree support system that accompanies you throughout your software journey. Your trust is our foundation, and we’re here to ensure that every interaction with us is a positive and trustworthy one.
